 |
 |
 |
 |
 |
 |
 |
 |
 |
| DELTA GUN SHOP | ||||||||
| prices do not include parts unless specified unuunless specified ...........effective July 2009 | ||||||||
| BARREL and LINER INSTALLATION | ||||||||
| Install Custom barrel in standard calibers | $650.00 | |||||||
| Set barrel back or open existing chamber | ...starts at | $150.00 | ||||||
| Install rimfire liner | $200.00 | |||||||
| Make and install stepped liner ...... (including our barrel) ......................starts at | $1,250.00 | |||||||
| Extractor or bolt-guide cuts | ........ea/ | $40.00 | ||||||
| Cut barrel and re-crown | ...starts at | $75.00 | ||||||
| Rechamber double rifles | ........per - | chamber | $210.00 | |||||
| SIGHTS, RIBS and BARREL FURNITURE | ||||||||
| Install island rear sight base | $160.00 | |||||||
| Make and install quarter rib with fixed rear sight | starts at | $750.00 | ||||||
| Install barrel band swivel base | $75.00 | |||||||
| Install barrel band front sight | $145.00 | |||||||
| Make and install sculpted scope bases | starts at | $450.00 | ||||||
| SAFETY INSTALLATIONS | ||||||||
| Install most 3-position safeties | $125.00 | |||||||
| Install 2-position safety on Mauser | $300.00 | |||||||
| TRIGGER WORK | ||||||||
| Remington 700 type | (if no grinding or truing needed) | $75.00 | ||||||
| Winchester 70 type ....................... (if oversize pins not required) | $75.00 | |||||||
| Most aftermarket installations .........(Timney, Blackburn, Shilen etc.) | $75.00 | |||||||
| Others estimated upon inspection | shop rate | |||||||
| VARIOUS BASIC & CUSTOM WORK | ||||||||
| Check headspace - bolt action | $25.00 | |||||||
| Check headspace - semi-auto | ...starts at | $35.00 | ||||||
| Clean and check | ...starts at | $75.00 | ||||||
| Drill and tap | ea/ | $25.00 | ||||||
| Dovetail cut | ea/ | $30.00 | ||||||
| Modify bolt stop/ejector housing on Mauser | $185.00 | |||||||
| Modify model 70 bolt release and checker | $75.00 | |||||||
| Open bolt face and modify claw extractor for magnum | $165.00 | |||||||
| Install Sako extractor | $150.00 | |||||||
| Engine turn bolt | $85.00 | |||||||
| Engine turn follower | $50.00 | |||||||
| Weld and sculpt custom bolt handle | $165.00 | |||||||
| Heat Treat Mauser receiver and bolt | $185.00 | |||||||
| Test fire for function ......................... (with customer ammunition) | $35.00 | |||||||
| Test fire - sight in at specified range (to 100 yds) | $75.00 | |||||||
| Modify magazine box, follower, action rails for feed correction | $75/Hr | |||||||
| Metal finishing | ||||||||
| Exterior grind action | ...starts at | $125.00 | ||||||
| Slow rust blue - bolt action rifle ........................... | ...starts at | $450.00 | ||||||
| Slow rust blue - double guns ............(shotguns and double rifles) | ...starts at | $550.00 | ||||||
| Slow rust blue - handgun | ...starts at | $475.00 | ||||||
| Caustic blue - rifle | ...starts at | $425.00 | ||||||
| Caustic blue - shotgun | ...starts at | $525.00 | ||||||
| Caustic blue - handgun | ...starts at | $450.00 | ||||||
| Electroless nickel | P.O.R. .. | |||||||
| Teflon and other bake-on finishes are contracted out | P.O.R.... | |||||||
| Color case finishing is sent out to specialty shops | P.O.R.... | |||||||
